Electric and Pneumatic Tube and Screw Samplers.gravity line samplers

 

APPLICATIONS

The TS Series of automatic sampler are well suited for a variety of applications from cement to animal feeds to pharmaceutical powders. Controlling the sampler operation is easy and flexible with the provided standard control panel. The LCD (Liquid Crystal Display) adjustable interval and sample timers allows the operator a simple and convenient method of controlling sampling frequency.

 

SPECIFICATIONS

ENGINEERING SPECIFICATIONS
Sample Tube 1 1/2″ OD with sample intake slot as required. 316 SST seamless polished. Tube length as per order (12″ standard). Heavy duty 1 3/4″ OD x 1 3/8″ ID 304 SST, optional.
Auger 1 3/8″ diameter x 1 1/2″ pitch 316 SST
Sample Discharge 1 1/2″ OD 316 SST, plain end
Seals, Bearings, and Bushings Urethane, Delrin®, standard; Teflon™, nylon, etc. optional
Housing, Spool, Mounting Flange, Face Plate Available in aluminium or stainless steel
Mounting Flange Standard 150# 2″ pipe flange drilling. Flat-faced 6″ OD, furnished with gasket. For mounting on round surfaces, a round mounting adaptor is required and is available as an option
Control Panel IP Enclosure with LCX4-20 Controller

 

MODELS TS-3 AND TSR-3
Power Requirements 110 V, 50 Hz single phase. 220 V optional
Actuators: Tube: 27 rpm, 214 in. lbs. gear motor with limit switches. Optional heavy duty 14 rpm, 428 in. lbs. available
Auger 82 rpm gear motor. Optional variable speed DC drive with 5-125 rpm SCR controller

 

MODELS TS3-A AND TSR3-A
Power Requirements 60-80 psi compressed air, 110 V / 50 Hz. 220 V optional
Actuators: Tube: 180 degree, 350 in. lbs. air actuator
Auger 1/3 hp air motor
Weight (Approximately) 25kg sampler; 10kg control panel