The Mini-Rotary Compact Rotary Level Switch is an economical, compact rotary level control that has been designed for use in small bins and hoppers. The small yet rugged design allows you to use the Mini-Rotary where other level sensors simply won’t fit.
The BinMaster BMRX range of Rotary Level Switches offer reliable, point level detection for bulk solids including powder, pellet and granular materials. For use in bins, vessels, chutes and conveyors with a material density from 2 lbs./cu.ft. to over 100 lbs./cu.ft. Suitable for feed, seed, grain, food, sand, gravel, concrete, aggregate, plastic, chemical, coal, and other materials.
Reliable, point level switch detection for bulk solids including powder, pellet and granular materials. For use in bins, vessels, chutes and conveyors with a material density from 2 lbs./cu.ft. to over 100 lbs./cu.ft. Suitable for feed, seed, grain, food, sand, gravel, concrete, aggregate, plastic, chemical, coal, and other materials.
BinMaster’s capacitance level switch sensors are used for high and low level detection in bins, silos, tanks, hoppers, chutes and other vessels used for material storage or process manufacturing. The level switches operate by detecting the presence or absence of material in contact with the probe by sensing minute changes (as low as 0.5 pF) in capacitance caused by the difference in the dielectric constant of the material versus the air.
No Probe Intrusions for Space Constrained Applications
The PROCAP I-FL and II-FL level switches offer “no probe intrusion” and are designed for space constrained areas or applications where material flow or bridging may damage a standard probe. It can be mounted on a bin wall, conveyor housing or a chute. The face of the bottom of the FL serves as the capacitance sensor which features Pro-Shield compensation for material build up and an adjustable time delay of up to 30 seconds to ensure accurate readings.
With Remote Electronics for High Temperature or High Vibration Applications
The Pro Remote capacitance level sensor features remote electronics located in a housing that is separated from the level probe making it suitable for high temperature, high vibration, or hazardous environments. It is CSA Class II listed and allows for the electronics to be installed up to 75 feet from the sensing probe and the hostile conditions, depending on the required sensitivity.
The Tilt Switch is a versatile, low-cost indicator for a wide variety of applications. Use it to detect high levels of large, heavy materials in tanks, bins and silos. Or install it as a plug detector in chutes. It’s equally suited as a load sensor when positioned over conveyor belts or open piles. It can be used for materials with a density of 15 lbs/cu.ft. and greater and suitable for grain, sand, gravel, concrete, aggregate, coal, and other materials.
Reliable, point level detection for free flowing dry materials. For use in bins, vessels, and some plugged chute applications with material density from 20 lbs/cu.ft. The unit is suitable for feed, seed, grain, food, rubber, plastics, light powders, granules and other materials.
Smarter, Tougher, Cost-Effective, Inventory System
Whether it’s chunk coal in a coal-fired power plant or fine granular solids in a plastic processor’s material storage silo, SmartBob II technology can handle it. Airborne dust, echo, steam, temperature changes or material densities pose no problem to SmartBob II. This system is capable of measuring all your liquid, large granular, or powders and dry bulk solids applications. The system is designed to work in conjunction with an IBM compatible personal computer using IMS software. It runs manually from a SBC push button console, or can communicate with PLC/DCS with an analogue 4-20 mA current loop output.