Level Equipment

    Europe’s Leading Supplier Of Level Switches and Monitoring Devices For the Process Industry

    ATEX Approved BMRX & Maxima Rotary Level Switches

    H & H Process Limited has been providing Level Switches and Process Measuring Equipment to the bulk handing industry for over 20 years.

    Over this period we have built up a considerable knowledge of Process Control and Engineering solutions.

    The Level Switches listed below are usually available from stock for next day delivery.

    To find out more information on any of these Level Detection products, click on the details below.

    Mini-Rotary Level Switch

    Level Equipment - Mini-Rotary Level Switch
    Compact Rotary Level Control For Dry Solids
    Models available: either 110vac or 220vac
    The Mini-Rotary Compact Rotary Level Switch is an economical, compact rotary level control that has been designed for use in small bins and hoppers. The small yet rugged design allows you to use the Mini-Rotary where other level sensors simply won’t fit.

    Read more

    Rotary Level Switch: The BMRX Series

    Level Equipment - Rotary Paddle Switches
    Rotary Level Switch Controls For Dry Solids
    ATEX Approved
    The BinMaster BMRX range of Rotary Level Switches offer reliable, point level detection for bulk solids including powder, pellet and granular materials. For use in bins, vessels, chutes and conveyors with a material density from 2 lbs./cu.ft. to over 100 lbs./cu.ft. Suitable for feed, seed, grain, food, sand, gravel, concrete, aggregate, plastic, chemical, coal, and other materials.
    Read more

    Rotary Paddle Switch: Maxima+

    fail safe rotary switches
    Fail-Safe Rotary Level Switch Control
    ATEX Approved
    Reliable, point level switch detection for bulk solids including powder, pellet and granular materials. For use in bins, vessels, chutes and conveyors with a material density from 2 lbs./cu.ft. to over 100 lbs./cu.ft. Suitable for feed, seed, grain, food, sand, gravel, concrete, aggregate, plastic, chemical, coal, and other materials.
    Read more

    PROCAP I & II – Capacitance Probe

    Level Equipment - Procap I and II
    Interference Free, Fail Safe Operation & “Quick-Set” Calibration
    BinMaster’s capacitance level switch sensors are used for high and low level detection in bins, silos, tanks, hoppers, chutes and other vessels used for material storage or process manufacturing. The level switches operate by detecting the presence or absence of material in contact with the probe by sensing minute changes (as low as 0.5 pF) in capacitance caused by the difference in the dielectric constant of the material versus the air.
    Read more

    PROCAP I-FL & II-FL – Capacitance Probe

    procap I-FL and II-FL
    No Probe Intrusions for Space Constrained Applications
    The PROCAP I-FL and II-FL level switches offer “no probe intrusion” and are designed for space constrained areas or applications where material flow or bridging may damage a standard probe. It can be mounted on a bin wall, conveyor housing or a chute. The face of the bottom of the FL serves as the capacitance sensor which features Pro-Shield compensation for material build up and an adjustable time delay of up to 30 seconds to ensure accurate readings.
    Read more

    PRO REMOTE – Capacitance Probe

    pro remote
    With Remote Electronics for High Temperature or High Vibration Applications
    The Pro Remote capacitance level sensor features remote electronics located in a housing that is separated from the level probe making it suitable for high temperature, high vibration, or hazardous environments. It is CSA Class II listed and allows for the electronics to be installed up to 75 feet from the sensing probe and the hostile conditions, depending on the required sensitivity.
    Read more

    Tilt Switch Level Indicator

    tilt switch
    Reliable, Simple Operation
    The Tilt Switch is a versatile, low-cost indicator for a wide variety of applications. Use it to detect high levels of large, heavy materials in tanks, bins and silos. Or install it as a plug detector in chutes. It’s equally suited as a load sensor when positioned over conveyor belts or open piles. It can be used for materials with a density of 15 lbs/cu.ft. and greater and suitable for grain, sand, gravel, concrete, aggregate, coal, and other materials.
    Read more

    Diaphragm Point Level Switch Controls

    Level Equipment - Diaphragram Switches
    For Use With Free Flowing Dry Materials
    Reliable, point level detection for free flowing dry materials. For use in bins, vessels, and some plugged chute applications with material density from 20 lbs/cu.ft. The unit is suitable for feed, seed, grain, food, rubber, plastics, light powders, granules and other materials.
    Read more

    SmartBob II Continuous Level

    smartbob
    Smarter, Tougher, Cost-Effective, Inventory System
    Whether it’s chunk coal in a coal-fired power plant or fine granular solids in a plastic processor’s material storage silo, SmartBob II technology can handle it. Airborne dust, echo, steam, temperature changes or material densities pose no problem to SmartBob II. This system is capable of measuring all your liquid, large granular, or powders and dry bulk solids applications. The system is designed to work in conjunction with an IBM compatible personal computer using IMS software. It runs manually from a SBC push button console, or can communicate with PLC/DCS with an analogue 4-20 mA current loop output.
    Read more

    Vibrating Rod: VR Series

    vibrating rod
    No Calibration Required
    The VR Series Vibrating level sensors are piezoelectric devices. Thus, the unit can be used for high and low level indication, or plugged chute detection.
    Read more

    Airbrator

    vibrating airbrator
    The Air Pad With Aeration and Vibration
    The Airbrator can eliminate packing and maintain flowability of finely-ground dry bulk materials. Suitable for flour, seeds, grain, fakes, sawdust, cement, PVC resin, fly ash, carbon black, lime, sand, cornstarch, gypsum, sugar and other materials. For indoor and outdoor applications in bins and storage vessels and can be used in high temperature, corrosive environments.
    Read more

    Diffuser Air Pad

    air pads
    For Aeration and Flow
    BinMaster Air Pads are a low-cost solution to many product flow problems. Finely ground dry materials such as flour or cement tend to pack in storage. When Air Pads are installed, low pressure air is directed along the bin walls to ensure a continuous and even flow of material out of the bin.
    Read more