PROCAP I & II
The PROCAP
I-FL & II-FL offer “no probe intrusion” and are designed for space constrained
areas or applications where material flow or bridging may damage a standard
probe. It can be mounted on a bin wall, conveyor housing or a chute. The face of
the bottom of the FL serves as the capacitance sensor which features Pro-Shield
compensation for material build up and an adjustable time delay of up to 30
seconds to ensure accurate readings. The screw-cap enclosure offers easy access
to components, which is especially handy in space-constrained installations.
Click here for specifications
|
PROCAP FLUSH
The PROCAP
I-FL & II-FL offer “no probe intrusion” and are designed for space constrained
areas or applications where material flow or bridging may damage a standard
probe. It can be mounted on a bin wall, conveyor housing or a chute. The face of
the bottom of the FL serves as the capacitance sensor which features Pro-Shield
compensation for material build up and an adjustable time delay of up to 30
seconds to ensure accurate readings. The screw-cap enclosure offers easy access
to components, which is especially handy in space-constrained installations.
Click here for specifications
|
PRO REMOTE
The Pro
Remote capacitance sensor features remote electronics located in a housing that
is separated from the probe making it suitable for high temperature, high
vibration, or hazardous environments. It is CSA Class II listed and allows for
the electronics to be installed up to 75 feet from the sensing probe and the
hostile conditions, depending on the required sensitivity. It offers simple,
"Quick-Set" calibration and adjustable sensitivity to less than one picofarad,
making it highly reliable in a variety of powders, solids, liquids and slurries.
Click here for specifications
|
)
)
)