|
APPLICATIONS
Reliable, point
level switch detection for bulk solids including powder, pellet and granular materials.
For use in bins, vessels, chutes and conveyors with a material density from 2
lbs./cu.ft. to over 100 lbs./cu.ft. Suitable for feed, seed, grain, food, sand,
gravel, concrete, aggregate, plastic, chemical, coal, and other materials.
FEATURES
The Fail-Safe
rotary level switch circuitry eliminates spills and process shortages from power failures, motor or
gear failures. Visual LED indicates sensor status: uncovered, covered and fault
conditions. Normal and fault status contact. A three bearing drive shaft
assembly reduces wear and increases reliability with a de-energizing motor for
extended operation life. It is interchangeable with other rotary units and has
an internal, bi-directional clutch.
SPECIFICATIONS
| MAXIMA+
Fail Safe Rotary Level Switch |
| Input Voltage: |
Multiple 24/120/240 VAC
or 24 VDC |
| Output Rating: |
DPDT 10 Amp 250 VAC, SPDT Supervisory SPDT 10 Amp 250 VAC/
Normal, Fault |
| Operating Temperature: |
-40°F to +158°F, (-40°C to +70°C) |
| Process Temperature: |
to 400°F, (to +204°C) |
| Pressure: |
1/2 Micron, 30 PSI |
| Approvals: |
Listed for Class 1, Groups C & D and Class II, Groups E, F & G
Hazardous Locations. |
| ATEX - Ex & CE |
Ex II 1D Ex tD A20 IP66 T93C (ta = -20°C to +85°C) |
| Fail-Safe Mode: |
Switch selectable between High & Low |
| Time Delay: |
Dual Independent Time Delay Selectable 5 seconds; Programmable to 25 seconds |
| Enclosure Material: |
Die Cast Aluminium, USDA approved powder coat finish |
| LED Indicator: |
Normal, Fault, Failure status monitoring |
| Mounting: |
1 1/4" NPT |
| Conduit Connection: |
3/4" NPT |
| Shaft Material: |
Stainless Steel |
| Paddles: |
316 Stainless Steel or Polyethylene |
Click Here for Product Brochure
Click Here for Maxima+ Level Switch Manual
|
