|
APPLICATIONS
The VR Series
Vibrating level sensors are piezoelectric devices. Thus, the unit can be used for high
and low level indication, or plugged chute detection. Used for material
densities from less than 2 lbs/cu.ft. including carbon back, plastics, fly ash,
feed, seed, grain, food, chemical, and other materials. It detects extremely
light, fluffy materials and materials with low dielectric constants.
FEATURES
The unique blade
level probe design specifically combats build up on the probe, eliminating false alarms
common with other piezoelectric devices. The fail-safe indication is high/low
switch selectable.
SPECIFICATIONS
| VIBRATING
ROD LEVEL SWITCH |
| Power Requirement: |
115/230 VAC, 50/60 Hz, 24 VDC |
| Power Consumption: |
2 VA |
| Output: |
SPDT relay, 5A @ 250 VAC |
| Fail-Safe: |
High/Low Switch Selectable |
| Operating Temperature: |
ELECTRONICS: -40° to 150° F (-40° to 65° C) PROCESS:
-40° to 190° F (-40° to 88° C) |
| Pressure: |
500 psi |
| Sensitivity: |
High/Low Switch Selectable |
| Time Delay: |
1 second from stop of vibration, 2-5 seconds from start of
vibration |
| Enclosure: |
Die Cast Aluminium |
| Probe: |
304 SS, 7.37" - 19.5" Insertion Length |
| Conduit Entry: |
PG 13.5 or ½" NPT |
| Mounting: |
1½"NPT |
| Status Indicator: |
RELAY:
Red LED on PCB
POWER: Yellow LED on
PCB
|
| Minimum Material Density: |
2 lbs/cu.ft. (32 kg/m³) |
Click Here for Level Switch Brochure
Click Here for Vibrating Rod Level Switch Manual
|
