For Aeration and Flow

BinMaster Air Pads are a low-cost solution to many product flow problems. Finely ground dry materials such as flour or cement tend to pack in storage. When Air Pads are installed, low pressure air is directed along the bin walls to ensure a continuous and even flow of material out of the bin.

The Air Pad With Aeration and Vibration

The Airbrator can eliminate packing and maintain flowability of finely-ground dry bulk materials. Suitable for flour, seeds, grain, fakes, sawdust, cement, PVC resin, fly ash, carbon black, lime, sand, cornstarch, gypsum, sugar and other materials. For indoor and outdoor applications in bins and storage vessels and can be used in high temperature, corrosive environments.

No Calibration Required

The VR Series Vibrating level sensors are piezoelectric devices. Thus, the unit can be used for high and low level indication, or plugged chute detection.

Smarter, Tougher, Cost-Effective, Inventory System

Whether it’s chunk coal in a coal-fired power plant or fine granular solids in a plastic processor’s material storage silo, SmartBob II technology can handle it. Airborne dust, echo, steam, temperature changes or material densities pose no problem to SmartBob II. This system is capable of measuring all your liquid, large granular, or powders and dry bulk solids applications. The system is designed to work in conjunction with an IBM compatible personal computer using IMS software. It runs manually from a SBC push button console, or can communicate with PLC/DCS with an analogue 4-20 mA current loop output.

For Use With Free Flowing Dry Materials

Reliable, point level detection for free flowing dry materials. For use in bins, vessels, and some plugged chute applications with material density from 20 lbs/cu.ft. The unit is suitable for feed, seed, grain, food, rubber, plastics, light powders, granules and other materials.

Reliable, Simple Operation

The Tilt Switch is a versatile, low-cost indicator for a wide variety of applications. Use it to detect high levels of large, heavy materials in tanks, bins and silos. Or install it as a plug detector in chutes. It’s equally suited as a load sensor when positioned over conveyor belts or open piles. It can be used for materials with a density of 15 lbs/cu.ft. and greater and suitable for grain, sand, gravel, concrete, aggregate, coal, and other materials.

With Remote Electronics for High Temperature or High Vibration Applications

The Pro Remote capacitance level sensor features remote electronics located in a housing that is separated from the level probe making it suitable for high temperature, high vibration, or hazardous environments. It is CSA Class II listed and allows for the electronics to be installed up to 75 feet from the sensing probe and the hostile conditions, depending on the required sensitivity.

No Probe Intrusions for Space Constrained Applications

The PROCAP I-FL and II-FL level switches offer “no probe intrusion” and are designed for space constrained areas or applications where material flow or bridging may damage a standard probe. It can be mounted on a bin wall, conveyor housing or a chute. The face of the bottom of the FL serves as the capacitance sensor which features Pro-Shield compensation for material build up and an adjustable time delay of up to 30 seconds to ensure accurate readings.

Interference Free, Fail Safe Operation & “Quick-Set” Calibration

BinMaster’s capacitance level switch sensors are used for high and low level detection in bins, silos, tanks, hoppers, chutes and other vessels used for material storage or process manufacturing. The level switches operate by detecting the presence or absence of material in contact with the probe by sensing minute changes (as low as 0.5 pF) in capacitance caused by the difference in the dielectric constant of the material versus the air.

Fail-Safe Rotary Level Switch Control

ATEX Approved

Reliable, point level switch detection for bulk solids including powder, pellet and granular materials. For use in bins, vessels, chutes and conveyors with a material density from 2 lbs./cu.ft. to over 100 lbs./cu.ft. Suitable for feed, seed, grain, food, sand, gravel, concrete, aggregate, plastic, chemical, coal, and other materials.

Rotary Level Switch Controls For Dry Solids

ATEX Approved

The BinMaster BMRX range of Rotary Level Switches offer reliable, point level detection for bulk solids including powder, pellet and granular materials. For use in bins, vessels, chutes and conveyors with a material density from 2 lbs./cu.ft. to over 100 lbs./cu.ft. Suitable for feed, seed, grain, food, sand, gravel, concrete, aggregate, plastic, chemical, coal, and other materials.