|
Uses: The ClampFlow is a measurement system designed for flow rate
measurement and control of solids conveyed in flexible hose lines.
The two criteria regarding the flexible hose lines: they are made from
non-conducting material such as plastic and their maximum diameter 20mm.
The ClampFlow C:
"Measurement from the outside" by clamping the sensor
around the pipe so the pipe does not have to be disconnected.
The ClampFlow P:
This is a "plug" version that means that both line ends are attached to the
sensor inlet and outlet.
Function:
A homogeneous, high frequency electromagnetic
field is coupled in the flexible hose. Solids being within this measuring field
absorb the energy of this alternating field. This leads to a measurement signal
proportional to the concentration of the material conveyed.
In addition there is a continuous flow velocity
measurement by means of a correlation procedure.
Installation:
The ClampFlow is easily installed but within
certain criteria for maximum performance. Contact the sales team to discuss your
particular application.
Technical Data:
|
Sensor |
| Housing: |
Aluminium |
| Protection: |
IP65 |
| Ambient Temperature: |
-10 to +60°C |
| Weight: |
0.4kg |
| Dimensions: |
105 x 75 x 28 (L x W x H) |
|
Evaluation Unit |
| Supply Voltage: |
24vdc |
| Power Consumption: |
12W |
| Protection: |
IP40 |
| Ambient Temperature: |
+10 to +45°C |
| Output Signals: Serial Output: |
4-20mA for flow rate RS 485, modbus protocol |
| Weight: |
2.0kg |
| Dimensions: |
160 x 200 x 90 (L x H x D) |
| 
