Uses:
SolidFlow is specially developed for measuring the flow rate of
solids conveyed in metallic ducts. It has been successfully tested for online
measuring of:
- types of dust, powder and granulates
- grain size between 1nm and 1cm
- pneumatically conveyed materials
- in free fall after mechanical conveying system
SolidFlow is wear-resistant and the commissioning is very easy.
Function:
The sensor utilises the latest microwave
technology used exclusively in metallic ducts.
A measuring field is produced by special linking
of the microwave together with the duct. The microwave energy is being scattered
by the solids particles and received by the sensor. These signals are evaluated
in frequency and amplitude.
Applications:
Benefits:
Technical Data:
|
Sensor/Sensor Housing |
| Housing: |
Stainless Steel or Galvanised Steel |
| Protection: |
IP65 |
| Operating Temperature: |
-20 to +80°C -- Optional -20 to +200°C |
| Max Working Pressure: |
1 bar -- Optional 10 bar |
| Working Frequency: |
K-Band 24,125GHz ±100 MHz |
| Transmitting Power: |
max. 5 mW |
| Weight: |
Approx. 1.3kg |
| Dimensions: |
Ø 60, Ø20, L271mm |
| Accuracy: |
±2...5% in calibrated range |
|
Evaluation Unit |
| Supply Voltage: |
110/230 V, 50 Hz, 24 vdc |
| Power Consumption: |
20W/24 VA |
| Current Consumption: |
Max. 1 A @ 24 V |
| Protection: |
IP^% according to EN 60 529/10.91 |
| Operating Temperature: |
-10 to +45°C |
| Enclosure Dimensions: |
258 x 237 x 174 (W x H x D) |
| Weight: |
Approx. 2.5kg |
| Interface: |
RS 485 |
| Current Output: |
4 to 20mA - 0 to 20mA Load <700Ω |
| Voltage Output: |
2 to 10v - 0 to 10v Load >2kΩ |
|
