Rotary Level Switch Controls For Dry SolidsLevel Equipment - Rotary Paddle Switches

ATEX Approved

Models available:

  1. BMRX: General purpose – 110vac –  £281.00
  2. BMRX: General purpose – 220vac –  £281.00
  3. BMRX: General purpose – 24vdc  –  £300.00

Paddles and Couplings Extra



The BinMaster BMRX range of Rotary Level Switches offer reliable, point level detection for bulk solids including powder, pellet and granular materials. For use in bins, vessels, chutes and conveyors with a material density from 2 lbs./cu.ft. to over 100 lbs./cu.ft. Suitable for feed, seed, grain, food, sand, gravel, concrete, aggregate, plastic, chemical, coal, and other materials.



A rugged construction and simple, dependable design with a de-energizing motor for extended operation life. A three bearing drive shaft assembly reduces wear and increases reliability. There is a terminal strip for quick and easy installation and an internal, bi-directional clutch.



BMRX Rotary Level Switch Models 110vac – 220vac – 24vdc
Input Voltage: Each Model Separate As Required
Contact Rating: DPDT Relay 10 Amp 250 VAC
Ambient Operating Temperature: -40°F to +185°F, (-40°C to +85°C)
Process Temperature: to 400°F (to 204°C)
Pressure: 1/2 micron, 30 PSI
Approvals: Listed for Class 1, Groups C & D and Class II, Groups E, F & G Hazardous Locations.
ATEX -Ex & CE Ex II 2G 1D Ex d IIB T5Ex tD A20 IP66 T93C

(ta = -20°C to +85°C)

Enclosure Type: NEMA 4X, 5, 7, 9 & 12
Fail Safe Mode: Switch Selectable Between High and Low Level
Enclosure Material: Die Cast Aluminium USDA Approved Powder Coat
Mounting: 1 1/4″ NPT
Conduit Connections: 3/4″ NPT
Shaft Material: 316 Stainless Steel
Paddle: 316 Stainless Steel or Polyethylene

Click Here for Product Brochure >

Click Here for BMRX Manual >